Embassy Trust Suite - Asus Edition    	            			(Build 02.06.02.002)

Copyright (c) 2003-2011, Wave Systems Corp. All rights reserved.

======================================================================================================

EMBASSY Security Center (ESC) provides TCG platform management functions, advanced 
user authentication functions, Trusted Drive management functions, and TPM key 
archive and restore functionality.

======================================================================================================

IMPORTANT NOTES: 

Firewalls and Antispyware Software
	Users running Firewall and/or Antispyware software may experience warnings from these
	tools when installing ETS.  When this occurs, users must IMMEDIATELY give permission 
	to the ETS installation to proceed.  Delay or denial of permission will result in an
	invalid installation.  Alternatively, users may temporarily disable Firewall and/or
	Antispyware software before installing ETS, then re-enable the Firewall and/or 
	Antispyware software after ETS installation is complete.

	In some situations, when upgrading ETS, the first login after the upgrade will take extra time 
	while the installation completes.  Users must let this process run to completion; failure 
	to do so can result in an incomplete installation of ETS.

======================================================================================================

Installation Requirements:

	Hardware:
		PC with a Pentium microprocessor, 300 MHz or greater
		VGA monitor or better, set to a resolution of 800 x 600 and 16 bit color,
		or better.
		(OPTIONAL) Trusted Computing Group (TCG) compliant v1.2 Trusted Platform Module (TPM)
		(OPTIONAL) Biometric sensor for Fingerprint support
		(OPTIONAL) Seagate or Samsung Self-Encrypting Drive (SED)
		See http://www.wave.com for a list of supported hardware providers.

	Software:
		Microsoft(R) Windows(R) Windows 7 64 bit	
		Windows XP 64 bit with Service Pack 2 or higher
		Windows Vista 64 bit with Service Pack 1 or 2 
		Microsoft(R) Internet Explorer version 6.1 (or above)
	
	IF YOU HAVE A 32 BIT OPERATING SYSTEM YOU MUST NOT INSTALL THIS PACKAGE.
	VISIT HTTP://www.wave.com to obtain the 64 bit version of this software.


Installation Procedure:

	User must have administrative privileges to install
	1.	Run the Wave executable file. This will uncompress the files necessary for the
 		installation and configuration of the Wave software.
	2.	If the process does not start automatically, run the "installer.exe" file.
	3.	The installation wizard will guide you through the installation
		and setup of the EMBASSY Trust Suite.

Upgrade:
	This package is intended for new platforms with a TPM Only.
	Please uninstall any existing versions of ESC before installing this software.

======================================================================================================

New Features/Functionality:

	1. 	Single-Use Password Recovery option
		This release includes a new drive access recovery option based on a device-independent 
		challenge/response protocol. This functionality can be used to dynamically provide new 
		challenge/response values each time it is used, or to use a static challenge/response 
		value that does not change until it is reset (through ERAS). The legacy method of recovery 
		is still supported for this release. Note that this feature requires the ERAS server
		product.

	2.	Support for the following languages has been added:

		 Traditional Chinese  Hong Kong 
		 Croatian 
		 Slovakian 
		 Slovenian 
		 Thai 

	3.	Support for the following international keyboards has been added:

		 Dutch
		 French
		 German
		 Swiss German
		 Italian
		 Spanish
		 Swedish
		 Finnish

	4.	TDM Auditing
		An SED Authentication Log is kept for the SED drive on the local machine; this log will 
		maintain an audit trail of all successful and unsuccessful authentication attempts, as 
		well as power on events.

	5. 	Expanded Opal-compliant drive support
		TDM now supports all drives that conform to the TCG Opal specification. In addition, the 
		number of user accounts available for Opal drives has been expanded to be the same as 
		the maximum number of users supported by the drive.	

	6.	Support for external SED drives connected via USB
		This release provides support for non-boot secondary SED drives connected via a USB port.  

	7.  	Extended support for external fingerprint readers
		OS-based logins are now supported for external fingerprint readers, regardless of whether 
		an internal fingerprint reader is available.

	8.	Support for systems without a mouse
		The ESC user interface and all wizards now support full tabbing behavior so that all 
		windows and functions can be used with systems without a mouse.

	9. 	User name tabbing
		The "Allow Tabbing of User Names" option, which lets users tab through the list of user 
		names, was added. This option is not available in cases where tabbing is required, such 
		as with non-English user names.

	10.	Credential "practice" screen
		A new screen was added to the TDM initialization wizard; immediately after the TDM 
		administrator account is created, this screen appears, allowing the user to practice 
		entering their credentials.

	11.	ERAS management of BIOS-level passwords
		ESC shall allow for ERAS management of the BIOS-level passwords: BIOS system password, 
		admin password, and ATA HDD password. Note that this feature requires the ERAS server
		product.


======================================================================================================

Limitations and Known Issues:

	General
	1.	Users with Targus Omnipass software must uninstall the Targus software 
		prior to installing ETS as the Targus Software is incompatible with ETS.
	2.	The ETS installation CD is required to perform a repair operation from
		add/remove programs.
	3.	Upgrading or reinstallation of the Ntru Trusted Software Stack (TSS) requires 
		the file "tsp1.dll" be copied from the install location to the Windows System32 
		directory.  Typically this is from 
		"c:\Program Files\NTRU Cryptosystems\NTRU TCG Software Stack\bin\" to 
		"C:\Windows\System32\"

	Upgrade
	1.	Upgrade of ESC will disable secure login.  Secure login may be re-enabled on the 
		Embassy Security Center Windows Logon page.
	2.	Upgrade of ESC will not preserve vault authorization settings. Users may use the 
		Embassy Security Center to reestablish this setting.

	Embassy Security Setup Wizard
	1.	Limited users may have the TPM Ownership state reported incorrectly in the 
		Embassy Security Setup Wizard.  A user with administrator rights may take 
		ownership using the Embassy Security Center then the limited user may use 
		the Embassy Security Setup Wizard to configure settings.

	Secure Login 
	1.	For systems with external fingerprint sensors, ensure that the sensor is 
		connected prior to starting the fingerprint enrollment wizard.
	2.	TPM reset or replacement will require re-enrollment of all biometric data.
	3. 	Installing third party software that interacts with the Logon process may 
		interfere with the proper operation of the Wave Secure Login product and/or 
		prevent proper operation of the third party product.

	Trusted Drive Manager
	1.	Maximum Trusted Drive password length is 32 characters unless overwritten by the
		Windows password policies.

	EMBASSY Security Center
	1.	Some personal Firewall products may block access to the network/internet during 
		installation and execution of applications.  If you have a firewall configured to 
		block access then you must add the following list of applications to the list of 
		applications that are authorized access.  Failure to grant access to the following 
		applications may prevent ETS from installing or executing properly.  
		- Microsoft Windows Installer - %WINDIR%\system32\MSIExec.exe
		- Ntru TSS - %PROGRAMFILES%\NTRU Cryptosystems\NTRU TCG Software Stack\bin\
			tcsd_win32.exe
		- Secure Update - %PROGRAMFILES%\Wave Systems Corp\Services Manager\Secure Update\
			SecureUpgrade.exe
		- ESC - %PROGRAMFILES%\Wave Systems Corp\EMBASSY Security Center\
			EmbassySecurityCenter.exe
	2.	Attempting to change the TPM Owner Password with an incorrect password may result 
		in an error message while closing ESC.  The error message can be cleared by 
		clicking on 'Ok'.  No damage to the system or the data will result.
	3. 	If experiencing intermittent "Sensor lost focus" error messages 
		during fingerprint authentication, user should retry enrolling fingerprint 
		or restarting the application.
	4.	After a user has logged onto the system with a Biometric sensor, a user must 
		login without a fingerprint before removing the biometric sensor from the 
		machine.  If the Biometric sensor is removed and the user logs off, the GINA will 
		fail with a message that the device is missing and not allow any login until the 
		device is replaced.
	5. 	Users will be unable to log in using Wave GINA if LANDesk is enabled.  Users must
		disable LANDesk before enabling the Wave GINA.

	Archive and Restore
	1.	During disaster recovery, a User with Administrative Rights must restore keys from 
		KTM prior to a Limited Users attempting restore.  Once an Administrator has restored
		keys, restore will work for Limited Users as well.
	2.	Attempting to Archive immediately after taking TPM ownership will result
		in a "The Archive was not created successfully" message.  This occurs because 
		there are not yet TPM keys available to archive.  Please click on 'Ok' clear 
		the error message.  This message will occur in every case where there no TPM 
		secured keys in existence.  After TPM keys have been created, future archive 
		operations will succeed.
	3.	If the TPM on the platform is reset or replaced then all enrolled biometric data 
		is lost and each fingerprint must be re-enrolled.

======================================================================================================

Technical Support:

	For technical support questions please contact us at:
		http://www.wave.com/support
